Ensuring accurate spraying of chemical products in the forestry industry

16 January, 2020

Until products are or can be developed to control pests and diseases which attack plants, trees and crops in a sustainable way, spraying chemicals  is a necessary evil. However, what can be done is to ensure that only the exact dose of chemicals is sprayed and precisely where they need to be, saving product from damaging the surrounding environment, preventing wastage and ensuring those handling the chemicals are kept safe. Our Professional Sprayers People business was able to solve a problem to which the Forestry Commission had spent a considerable amount of time seeking a solution.

The Forestry Commission was coming under pressure from the Environment Agency (EA) to come up with a best-practice solution for the spraying of commercially grown pine trees against pine weevil. They needed to demonstrate a method the industry could use which would prevent the overuse of chemical pesticides by the application of an exact dose at the base of each pine sapling.

The existing practice was to spray each tree for a set time. However, this allowed for too much variation in doses: the time might not be precise, particularly if an operator was spraying for a considerable time period across a large area; and/or the flow rate would vary depending to the pressure in the backpack sprayer. The Forestry Commission had trialled the use of pressure regulators but this did not solve the timing issue. The technical department at the Forestry Commission had been seeking solutions for some time before approaching The Professional Sprayers People.

Background

The pine weevil, is highly destructive to young conifers, particulary pine trees and particularly pine grown for the softwood timber trade.

The weevils lay their eggs in the stumps of newly felled trees and the resulting adult weevils then attack young restocked saplings, feeding on the bark, causing ring barking and eventual death of the trees. According to Forest Research*, if left unmanaged pine weevils can destroy 50 per cent of young trees on a site and, in worst case scenarios, they can destroy all of them. Because adult weevils may also able to travel if conditions are right, trees on nearby sites may also be at risk.

This is a huge issue. Forest Research* states that hundreds of millions of pounds worth of investment and thousands of jobs in the nursery, forestry, timber haulage and timber-processing industries depend on the UK’s conifer forests and their good health.
* https://www.forestresearch.gov.uk/

Dosing valve can be used with any backpack sprayer brandThe Solution

The Professional Sprayers People recommended the use of the Dosimeter Valve.

This unique product can be fitted to any brand of backpack or compression sprayer. It is calibratable, using a very simple mechanism on the top of the unit, to deliver a precise dose of between 2 and 25ml per trigger press. Once the fluid is delivered the sprayer automatically stops spraying until the trigger valve is released and re-pressed. This means an accurate dose can be delivered each time.

Once calibrated correctly, the Dosimeter Valves allows for precise and rapid dosing, saving time and effort but also reducing chemical waste considerably.

There are also a range of lance extensions that can be used with the dosimeter to facilitate easy spraying at the base of plants and trees such as pine saplings.

Results

The Forestry Commission trialled the Dosimeter Valve on their backpack sprayers and could immediately see the
benefits and that it would demonstrate exactly what the Environment Agency had requested. As a result, they chose to recommend the product to the industry.

They also recommended the lance extensions, finding the 600mm and 900mm lances enabled operators of different heights to easily spray the roots of the samplings without having to over-reach or bend. The technical team confirmed that the Dosimeter Valve was the product they had been waiting for!

If you have a spraying problem you would like help finding a solution to or to find out more about PSP's innovative range of products, please do not hesitate to contact us.

Tel: 01273 400092
info@prosprayers.co.uk
www.prosprayers.co.uk

Recent Posts

SNP DELIGHTED TO LAUNCH INNOVATIVE CLEANING AND DISINFECTING SYSTEMS FOR THE FOOD INDUSTRY AND OTHER INDUSTRIAL FACILITIES
Spraying against the coronavirus
Looking forward to Christmas and the perfect Christmas tree
LOOKING FORWARD TO CHRISTMAS AND THE PERFECT CHRISTMAS TREE
Calling for the spray nozzle industry to work together to combat Covid-19
Covid-19 update for The Spray People Group